Description

Single Handle Chrome Finishing LED Color Change Glass Waterfall Bathroom Sink Faucet

Every item must be 100% warranty + 100% no worry though we know there are many COPIES shortage of warranty.

• Brand new in box ready to ship;
• The LED light is powered by 4 units of AA battery, 1.5V (included in the package), and the light only works while open the faucet .
• This item will change its color by detecting water temperature;
• Durable Solid Brass & Tempered Glass Construction;
• Polished Chrome Finish;
• When water temperature is<32 degree, Green color will show automatically;
• When water temperature is between 32~45 degree,Blue color will show;
• When water temperature is above 45 degree, Red color will show.

Tools You Need for Installation

• Adjustable wrench

• Tape

• Screwdriver

• Flashlight

General Faucet Installation Instruction

Please kindly note that this is just a general instruction, each faucet you buy from us has installation instruction with details inside package.

Step 1: Position the Faucet

A: Begin installing your faucet by placing the gasket and faucet in position on the sink.

B: From under the sink, thread the plastic mounting nuts onto the faucet shanks. Be sure the large side of each plastic mounting nut is up.

C: From the top of the sink, check the faucet and gasket position.

D: From under the sink tighten the mounting nuts, making certain not to over-tighten which could damage the nuts and make them difficult to remove in the future.

Step 2: Attach the Water Supply Tubes

A: Wrap the threads of the water-supply valve with Teflon tape. Although most plumbers use only Teflon tape, some plumbing supply manufacturers also recommend using plumber’s putty.

B: Thread the water supply nut onto the shut-off valve. Tighten the nut with a wrench.

C: Wrap the threads on the faucet shank with Teflon tape, and then thread the water supply nut onto the faucet shank.

D: Tighten the nut with a wrench.

Step 3: Connect the Faucet Lift Rod

A-1: From the top of the sink, insert the lift-rod into the faucet.

A-2: From under the sink, make sure the pivot-rod is in the down position. Insert the lift-rod into the lift-rod strap. Tighten the screw.

B-1: From the top of the sink, make sure the lift-rod opens and closes the drain plug as desired.

B-2: Make any needed adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.

B-3: If you need to connect the lift-rod strap to the pivot rod, slide one end of the spring clip onto the pivot-rod.

B-4: Make sure that both the pivot -rod and the lift-rod are in the down position. Insert the pivot-rod in the closest hole in the lift-rod strap.

B-5: Slide the other end of the pivot-rod. Make sure the lift-rod opens and closes the drain plug as desired.

C-1: Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.

C-2: Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap.

Step 4: Flush the Faucet

A-1: Anytime you work on plumbing, filings, chips, and other debris can fall into the plumbing pipes.

A-2: This debris can damage the sealing surfaces inside the faucet and cause leaks.

A-3: Remove aerator and black sealing gasket above it.

A-4: Before turning on the water supply, make sure the faucet handles are open (on position) in order to remove the debris without causing damage.

B: Open both water supply valves under the sink.

C-1: Allow the water to run for 15 seconds.

C-2: Close the faucet handles (turn off).

D: Make sure any debris is cleaned from the aerator screen.

E: Replace the aerator.

A

Shipping:

1) We will do shipping for multiple items together. Before you bidding the items,please contract with us to confirm the style and air-express charge discount .

2) Orders are normally shipped within 3 business days after payment has cleared. ( Jet Lag problem and Legal holidays will out of the business days.)

3) We will send message or E-mail to you with tracking No of the items or delivery confirmations when the produts your ordered are shipped.

4) UPS Air express will do for our most iterms shipping. It takes 5-7days to you usually(with the exception of the delay caused by Force Majeure).

Payment:

1) AliPay and PayPal, Major credit cards accepted.

2) Payment instructions will be informed you when you do” buy-it-now” and auction finished.

3) Please conform finish the payment after you received the products, check everything with the products well.

4) Payments should be received within 30days by Alibaba payment systerm automatically if you forgot to confirm after you received the products.

5) When finishing the payment, please include do feedback with all auction numbers and your shipping information.

Returning Management

1) Returning Requested with E-mail or message, please inform us within 5days after the shipping arrival. Any exchanges or Retunds be made should do confirmation from us.

2) We will not accept or process any returns, exchanges or refunds without any information and confirmation. The buyer will be responsible for return shipping charges and the incident loss.

3) Returned items must be in original, uninstalled condition, including packaging, warranty, instructions, etc.

4) In case of Lacking or defective part ,only a replacement or exchange will be made.

Every item must be 100% warranty + 100% no worry though we know there are many COPIES shortage of warranty.