Modern LED faucet & glass faucet & LED waterfall faucet + 100% warranty + free shipping

Feaures:

• Brand new in box ready to ship;
• The LED light is powered by 4 units of AA battery, 1.5V (included in the package), and the light only works while open the faucet .
• This item will change its color by detecting water temperature;
• Durable Solid Brass & Tempered Glass Construction;
• Polished Chrome Finish;
• When water temperature is<32 degree, Green color will show automatically;
• When water temperature is between 32~45 degree,Blue color will show;
• When water temperature is above 45 degree, Red color will show.

Tools You Need for Installation

• Adjustable wrench

• Tape

• Screwdriver

• Flashlight

General Faucet Installation Instruction:

(Please kindly note that this is just a general instruction, each faucet you buy from us has installation instruction with details inside package.)

Step 1: Position the Faucet

A: Begin installing your faucet by placing the gasket and faucet in position on the sink.

B: From under the sink, thread the plastic mounting nuts onto the faucet shanks. Be sure the large side of each plastic mounting nut is up.

C: From the top of the sink, check the faucet and gasket position.

D: From under the sink tighten the mounting nuts, making certain not to over-tighten which could damage the nuts and make them difficult to remove in the future.

Step 2: Attach the Water Supply Tubes

A: Wrap the threads of the water-supply valve with Teflon tape. Although most plumbers use only Teflon tape, some plumbing supply manufacturers also recommend using plumber’s putty.

B: Thread the water supply nut onto the shut-off valve. Tighten the nut with a wrench.

C: Wrap the threads on the faucet shank with Teflon tape, and then thread the water supply nut onto the faucet shank.

D: Tighten the nut with a wrench.

Step 3: Connect the Faucet Lift Rod

A-1: From the top of the sink, insert the lift-rod into the faucet.

A-2: From under the sink, make sure the pivot-rod is in the down position. Insert the lift-rod into the lift-rod strap. Tighten the screw.

B-1: From the top of the sink, make sure the lift-rod opens and closes the drain plug as desired.

B-2: Make any needed adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.

B-3: If you need to connect the lift-rod strap to the pivot rod, slide one end of the spring clip onto the pivot-rod.

B-4: Make sure that both the pivot -rod and the lift-rod are in the down position. Insert the pivot-rod in the closest hole in the lift-rod strap.

B-5: Slide the other end of the pivot-rod. Make sure the lift-rod opens and closes the drain plug as desired.

C-1: Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.

C-2: Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap.

Step 4: Flush the Faucet

A-1: Anytime you work on plumbing, filings, chips, and other debris can fall into the plumbing pipes.

A-2: This debris can damage the sealing surfaces inside the faucet and cause leaks.

A-3: Remove aerator and black sealing gasket above it.

A-4: Before turning on the water supply, make sure the faucet handles are open (on position) in order to remove the debris without causing damage.

B: Open both water supply valves under the sink.

C-1: Allow the water to run for 15 seconds.

C-2: Close the faucet handles (turn off).

D: Make sure any debris is cleaned from the aerator screen.

E: Replace the aerator.

Payment

Payment methods available in Aliexpress include: Credit Card, Paypal, Bank Transfer.

Shipping

1.We will ship out the items within 3 working days after the payment confirmed by Aliexpress. We will inform you if we need more time to prepare the items.

2.It usually take 5 to 10 days to reach your designated address by EMS. Other shipping terms are also available, such as DHL, UPS, HONGKONGPOST.

3.Normally, we declare the product value as 15 USD on customs declaration when shipped by HK post, to avoid customs fee for you .And we do not charge any local tariff. If you have any specific demand, please contact us before shipping.

4.Please let us know if you still don’t receive the items within 15 working days after you paid, then we could check it for you. .

Return and Refund Policy

1.Please contact us before you send the item back. Defective situation must be reported to us within 3-5 days attached with the pictures
2.Please ensure the item will be returned in good condition with original package and return the item within 2 weeks from the merchandise is received.
3.We will send new replacement or refund once the item is received. If it is refunded, only item’s listing price is refundable, shipping and required insurance fees are not refundable.
4.Buyer is responsible for all return shipping charges if full payment refunded.

Customer Service

We offer 7/24 service, please feel free to contact me if you have any question. We will reply you within 12hours.

Feedback

If you are satisfied with our goods, please give us a positive feedback, thanks in advance. !!!
If you are not satisfied, please kindly let us know. Your constructive advice will be our motion to revise and improve. We really appreciate it.